Máy biến áp khô đúc nhựa 10 kV

Máy biến áp khô đúc nhựa 10 kV

10kV cast-resin dry-type transformer from the SCB13 / SCB14 family, covering 30–2500 kVA. Cooling, insulation class, enclosure and terminal arrangements follow the approved project specification.
Nhận báo giá nhanh chóng






    Tổng quan về sản phẩm

    Máy biến áp khô đúc nhựa 10 kV

    The Máy biến áp khô đúc nhựa 10 kV family includes SCB13 and SCB14 series units for distribution projects. The listed capacity range is 30–2500 kVA. Henghui reviews the required voltage ratio and site conditions before confirming a configuration.

    The cast-resin winding assembly provides a dry-type construction. However, the complete installation still needs suitable ventilation, access and environmental protection. An enclosure and temperature monitoring can form part of the agreed order.

    For example, a building installation may have limits on available space and ventilation. Therefore, share the room layout as well as the electrical ratings during selection.

    Technical Specifications

    Series SCB13 / SCB14
    Voltage class 10 kV; exact ratio to project requirements
    Rated capacity 30–2500 kVA
    Construction Cast-resin dry-type
    Cooling AN / AF, depending on configuration
    Insulation class F / H, as specified

    Typical product-family information. Final ratings, losses, dimensions and enclosure suitability follow the approved technical specification.

    Applications & Quotation

    Applications and Installation Review

    Typical applications include commercial buildings, industrial facilities and packaged substations where the electrical design specifies a dry-type transformer.

    First, confirm the required load capacity and primary and secondary voltages. Next, review the ambient conditions, cooling arrangement and enclosure. Also, check terminal access and the route for moving the transformer into position.

    Natural or forced-air cooling depends on the configuration. Consequently, any rating associated with a cooling mode must match the selected data sheet. The family capacity range does not guarantee every combination of rating and enclosure.

    Quotation Checklist

    Request a Dry-Type Transformer Quote

    For a Máy biến áp khô đúc nhựa 10 kV quotation, provide:

    • Required capacity and HV/LV voltage ratio
    • Frequency, vector group, impedance and tapping requirements
    • Cooling mode and insulation class requirements
    • Enclosure rating, room layout and ventilation details
    • Altitude, ambient conditions and terminal arrangement
    • Quantity, destination and delivery schedule

    If some details remain open, identify them clearly. Our team can then state the assumptions in the proposal for your review.

    Documentation & Supply Scope

    Confirm the Offered Configuration

    The quotation defines the selected rating, enclosure, accessories and inspection scope. Also, request the equipment data sheet, dimensions and applicable test documents.

    Our team agrees on the final losses, cooling arrangement and installation limits with you before production. Compare these details alongside the price rather than relying on the series name alone.

    For a different voltage class, see our 20kV dry-type transformer. Finally, send your transformer requirements or email Kathy: kathy@nbhh-group.com.

    Bạn đang lên kế hoạch cho một dự án phân phối điện hoặc năng lượng tái tạo?

    Nhận hỗ trợ kỹ thuật và báo giá tùy chỉnh

    • Hơn 15 năm kinh nghiệm trong ngành
    • Dòng sản phẩm đầy đủ về kết nối lưới điện và bù đắp
    • Phục vụ khách hàng tại hơn 30 quốc gia
    • Hơn 100 quyền sở hữu trí tuệ
    • 12% Doanh thu hàng năm được tái đầu tư vào nghiên cứu và phát triển (R&D) và đổi mới.
    • Hỗ trợ kỹ thuật toàn diện và thiết kế kỹ thuật tùy chỉnh

    Yêu cầu báo giá

      viTiếng Việt