- Hơn 15 năm kinh nghiệm trong ngành
- Dòng sản phẩm đầy đủ về kết nối lưới điện và bù đắp
- Phục vụ khách hàng tại hơn 30 quốc gia
- Hơn 100 quyền sở hữu trí tuệ
- 12% Doanh thu hàng năm được tái đầu tư vào nghiên cứu và phát triển (R&D) và đổi mới.
- Hỗ trợ kỹ thuật toàn diện và thiết kế kỹ thuật tùy chỉnh
Bảng điều khiển PLC cho tự động hóa công nghiệp
Bảng điều khiển PLC cho tự động hóa công nghiệp
PLC Control Panel Overview
PLC Control Panel Design
A PLC control panel combines a programmable logic controller, field signal connections and operator controls in one cabinet. Henghui configures the assembly around the machine or process you need to control.
The PLC reads input signals and sends commands according to an agreed program. For example, a process may need to check a level signal, start equipment in a defined order and display an alarm. The operating sequence and I/O list provide the basis for selecting the hardware and developing the logic.
In addition, the cabinet can include power distribution and switching devices within the agreed scope. Motor speed control requires suitable drive hardware when specified; a PLC alone does not provide that function.
Chức năng & Cấu hình
Control Functions and Operator Interface
- PLC and I/O: select input and output modules for the approved signal list, with spare capacity where required.
- Operator interface: use push buttons, indicator lights or an optional HMI to match the operating needs.
- Control modes: define manual, automatic and remote commands in the control narrative.
- Status and alarms: agree on operating feedback, fault indication and alarm responses before programming.
- Communication: confirm protocols and device interfaces against the selected hardware.
- Cabinet environment: match enclosure protection, ventilation and temperature control to the installation.
Thông số kỹ thuật tiêu biểu
Electrical and Control Data
| Sản phẩm | Tủ điều khiển PLC / Bảng điều khiển PLC |
|---|---|
| Điện áp định mức của mạch chính | Điện xoay chiều ba pha 380 V hoặc điện xoay chiều một pha 220 V, tùy thuộc vào cấu hình |
| Cấp độ bảo vệ | IP20 hoặc IP54, tùy thuộc vào cấu hình |
| Nhiệt độ hoạt động thông thường | -10°C đến +45°C |
| Hệ thống điều khiển | PLC với cấu hình I/O dành riêng cho dự án |
| Giao diện người vận hành | Màn hình cảm ứng HMI theo yêu cầu |
| Giao tiếp | Modbus / PROFINET / Ethernet, tùy thuộc vào phần cứng được chọn |
| Giám sát từ xa | Tùy chọn; phạm vi và các thỏa thuận về quyền truy cập sẽ được thống nhất |
| Kích thước tủ | Theo bản vẽ thiết kế đã được phê duyệt |
Configurations shown are examples. Our team confirms final ratings, functions, protection levels and site suitability in the approved specification.
Applications & System Interfaces
Equipment Connections and Applications
Typical applications include industrial machines, production lines, wastewater treatment equipment and HVAC systems. The required functions depend on the process and connected equipment.
For this reason, confirm how the panel will exchange commands and feedback with sensors, motors and other controllers. A clear interface list helps avoid missing connections during installation.
In addition, if your project needs motor speed control, review our VFD control panel options. PLC logic and VFDs can be combined when the project requires both.
Request a PLC Control Panel Quote
Prepare Your PLC Control Panel Enquiry
Send your equipment list, process description, operating sequence and I/O list. Include available electrical drawings, supply voltage, PLC and HMI preferences, communication requirements and installation conditions.
Finally, state the quantity, destination and delivery schedule. Confirm whether the order should include PLC programming, HMI development or commissioning support.
Phạm vi thiết kế và cung cấp
The quotation defines the hardware, software, drawings and functional checks included in the order. Before assembly, our team agrees on component models and control logic with you. However, remote monitoring needs a separately defined scope and access arrangement.
Final ratings and environmental suitability follow the approved project specification. Discuss your automation requirements or email Kathy: kathy@nbhh-group.com for a project-specific proposal.
Bạn đang lên kế hoạch cho một dự án phân phối điện hoặc năng lượng tái tạo?
Nhận hỗ trợ kỹ thuật và báo giá tùy chỉnh
Gửi email cho chúng tôi





