Relé de protección contra el funcionamiento en isla

Relé de protección contra el funcionamiento en isla

Anti-islanding protection relay for distribution transformer and renewable energy grid connection applications. Provides configurable protection, event records, switch-status monitoring and RS485 communication for integration into the project protection scheme.
Presupuesto rápido






    Descripción general del producto

    The Henghui anti-islanding protection relay monitors electrical conditions at grid connection points. It provides control signals to help isolate distributed generation when it detects abnormal grid conditions. Panel builders can integrate the device into a control panel or switchgear cabinet as part of the project protection scheme.

    Anti-islanding protection relay applications

    Typical applications include the low-voltage side of distribution transformers and renewable energy grid connections. First, define the connection diagram and required protection functions. Then match the relay inputs, auxiliary supply and output contacts to the approved design.

    The relay provides protection signals to the switching circuit. The complete protection scheme also requires suitable switching equipment, wiring and coordinated settings. Confirm those details for the selected configuration before installation.

    Functions and Features

    Protection and switching functions

    • Two-stage overvoltage, undervoltage, overfrequency, underfrequency and reverse power protection.
    • Sudden frequency change protection, overcurrent and overload protection.
    • Instantaneous and time-delayed trip functions, plus voltage-recovery closing as configured.
    • Anti-pumping circuit and switch-status monitoring.

    Inputs, records and communication

    • 10 passive switch-status inputs and 3 dry-contact relay outputs.
    • 4 AC current inputs and 4 AC voltage inputs.
    • 6-channel non-electrical protection inputs.
    • CT/PT circuit-disconnection alarms, event records and fault waveform recording.
    • Standard RS485 communication for connection to the specified monitoring system.

    Confirm the communication protocol, contact ratings and available functions for the ordered version. Panel mounting and individual switchgear installation depend on the project layout.

    Technical Specifications

    Auxiliary power supply AC 85–450 V or DC 100–370 V
    Rated AC current input 5 A or 1 A
    Rated AC voltage 380 V
    Rated frequency 50 Hz
    Operating temperature −10°C to +55°C
    Storage temperature −40°C to +85°C
    Relative humidity ≤95%, non-condensing
    Atmospheric pressure 80–110 kPa
    Current-circuit burden ≤0.5 VA per phase at 5 A
    Voltage-circuit burden ≤0.8 VA per phase at 380 V
    Device power consumption ≤5 W as listed in the catalogue
    Communication RS485

    Selection and Application Notes

    Define the relay wiring and settings

    Provide the grid connection diagram, transformer data and CT ratios. Also specify the voltage-input arrangement, auxiliary supply and required trip or closing logic. These details help confirm the relay configuration and the interface to the switching equipment.

    Coordinate anti-islanding and reclosing settings with the project grid connection requirements. Confirm the operating thresholds and time delays during the design review. Qualified personnel should complete wiring checks and functional tests before commissioning.

    Confirm the selected version

    The table above retains the specifications listed for this product. Final wiring, dimensions, communication protocol and available functions follow the confirmed device version. Request the relevant data sheet and connection drawing with your quotation.

    Quotation & Related Products

    Request an anti-islanding protection relay quotation

    Email Kathy at kathy@nbhh-group.com with the quantity, application and required functions. Attach the single-line diagram and state any documentation or test requirements. We can then review the configuration and quotation scope.

    For related equipment, see our photovoltaic grid connection cabinet y reverse power flow protection device. Select each device according to its role in the approved protection scheme.

    ¿Estás planificando un proyecto de distribución eléctrica o de energías renovables?

    Obtén asistencia técnica y un presupuesto personalizado

    • Más de 15 años de experiencia en el sector
    • Gama completa de productos de conexión a red y compensación
    • Atendemos a clientes en más de 30 países
    • Más de 100 derechos de propiedad intelectual
    • 12% Ingresos anuales reinvertidos en I+D Innovación
    • Asistencia técnica de ciclo completo e ingeniería personalizada

    Solicitar presupuesto

      es_ESEspañol