Панель управления частотно-регулируемым приводом для управления двигателем

Панель управления частотно-регулируемым приводом для управления двигателем

VFD control panel for adjustable motor speed, with drive selection, protection and local or remote controls to match the application. Send the motor nameplate data and load details for a project-specific configuration.
Получить быструю цитату






    Обзор продукта

    VFD Control Panel for Motor Applications

    A VFD control panel combines a variable frequency drive with the electrical protection and controls needed for a motor application. Henghui selects the drive and cabinet arrangement from the motor nameplate data, load type and operating duty.

    The drive varies the supply to a compatible motor to adjust its speed. For example, a pump or fan may need to follow changing process demand rather than operate continuously at a fixed speed.

    However, energy performance depends on the load and operating profile. Adding a drive alone does not establish a fixed saving. Therefore, define the required speed range and process conditions before selecting the equipment.

    Функции и настройки

    Speed Commands and System Interfaces

    • Set acceleration and deceleration ramps for the application.
    • Include local start/stop and remote commands where specified.
    • Select protection devices for the approved electrical design.
    • Add pressure or temperature control when the scope includes the required sensors and control functions.
    • Confirm communication interfaces against the selected drive and control hardware.
    • Match cabinet cooling and enclosure protection to the installation.

    Also, agree on bypass and duty/standby functions separately. These arrangements require a defined circuit and operating sequence.

    Типовые технические характеристики

    Продукт Шкаф управления частотно-регулируемым приводом / панель управления частотно-регулируемым приводом
    Типичная схема питания основного контура 380 В переменного тока, 50 Гц
    Номинальная мощность двигателя Подбор с учетом характеристик двигателя, режима работы и нагрузки
    Степень защиты Настроен с учетом условий монтажа
    Типичная рабочая температура от -25 °C до +40 °C; совместимость компонентов подлежит подтверждению
    Режим управления Локальный / удаленный / автоматический режим работы в соответствии с указаниями
    Коммуникация В зависимости от выбранного привода и дополнительного аппаратного обеспечения системы управления
    Размеры корпуса и охлаждение В соответствии с утвержденной схемой расположения и тепловым проектом

    Представленные конфигурации приведены в качестве примеров. Окончательные номинальные параметры, функции, уровни защиты и пригодность для использования в определенных условиях окружающей среды подтверждаются в утвержденной проектной спецификации.

    Приложения

    Pumps, Fans and Process Equipment

    Typical applications include pumping, ventilation, HVAC and cooling water circulation. First, check whether the motor and driven equipment suit variable-speed operation. Next, confirm the required speed range, load profile and duty.

    If the process needs more complex sequences, a PLC control panel may form part of the arrangement. The final interface must match the selected hardware and control design.

    Информация для подготовки коммерческого предложения

    Request a VFD Control Panel Quote

    Please send the motor quantity, rated power, voltage, nameplate current and load type. Also, include the speed range, duty, supply conditions and installation environment.

    For automatic control, describe the sensors, setpoints and required response. In addition, specify communication needs and any bypass or duty/standby arrangement.

    Finally, provide the drawings, quantity, destination and delivery schedule. A clear operating description helps our team define a comparable proposal.

    Поставка и документация по проекту

    Confirm Hardware and Engineering Scope

    The quotation defines the drive selection, circuit arrangement, enclosure and functional checks. Our team agrees on the component models, cooling design and drawings before assembly.

    Programming and commissioning support need a defined scope. Likewise, confirm any reactors, filters or other accessories against the actual application.

    For a VFD control panel proposal, send your motor list to Kathy or email kathy@nbhh-group.com.

    Планируете реализовать проект по распределению электроэнергии или использованию возобновляемых источников энергии?

    Получите техническую поддержку и индивидуальное предложение

    • Более 15 лет опыта работы в отрасли
    • Полный ассортимент продукции для подключения к сети и компенсации
    • Обслуживаем клиентов в более чем 30 странах
    • Более 100 прав интеллектуальной собственности
    • 12% Годовая выручка, реинвестированная в инновации НИОКР
    • Техническая поддержка полного цикла и индивидуальное проектирование

    Получить предложение

      ru_RUРусский