Low Voltage Switchboard RFQ Checklist for Buyers

A low voltage switchboard RFQ is easier to quote when every supplier works from the same drawings and equipment schedule. A request that only says “400 V switchboard” leaves key questions open: how many feeders are there, which devices belong in each feeder, and what documents should the supplier include? Use the checklist below to make quotations easier to compare.

Start with the single-line diagram

Send the latest drawing and mark its revision. Identify the panels you want quoted and label the incoming supply, outgoing feeders, metering points and any bus coupler. If your project includes separate main and sub-main distribution boards, use a distinct panel reference for each one.

Also include the specified system voltage and frequency, incoming current rating, and available fault level at the board. List any short-circuit ratings required in the specification. If the fault level is pending, flag it as open so suppliers can state their assumptions.

Add a feeder schedule to your switchboard RFQ

For each outgoing circuit, list its reference, load or destination, rating and quantity. Include any specified breaker type, number of poles, or protection and metering functions. For motor feeders, identify the starting method and share the motor data when available.

If the client requires specific component brands or part numbers, include the approved list. Also state whether suppliers may propose alternatives. Ask each supplier to identify those alternatives in the bill of materials so you can compare them with the original requirement.

Confirm cabinet layout and site conditions

State whether the assembly will sit indoors or outdoors, and share any specified enclosure rating. Include the available footprint, access clearances, cable entry direction and cable sizes when known. These details help the supplier propose a layout you can review before production.

For projects with tight access, share any doorway, lift or transport limits. The supplier can then confirm the proposed enclosure and shipping arrangement in the quotation.

Define documents, testing and delivery scope

List what your team needs for drawing approval and handover. Typical requests include a general arrangement drawing, component schedule, equipment datasheets and agreed inspection records. If your project requires a witnessed factory acceptance test (FAT), mention it in the RFQ so suppliers can price it consistently.

Finally, state the quantity, delivery destination and target date. Identify any installation or commissioning support you want included. Ask suppliers to show exclusions and open technical points alongside their price.

Send your drawings for a quotation

If your low voltage switchboard RFQ is still in preparation, send the drawings and panel schedule you already have to Kathy em kathy@nbhh-group.com. Henghui can review your requirements and confirm which details are needed to prepare the offer. View Henghui’s Low Voltage Power Distribution Cabinet.

Produtos relacionados

Nenhum resultado encontrado.